Vinyl problems
Because our invention integrates with the listener’s existing audio equipment, it fully complies with the standards of vinyl recording and playback. These are the LP Mono format (Long Play Record), introduced by Columbia in 1948, and its stereo version, brought to market by Westrex in 1958.
Those specifications still apply today, which is what keeps old and new records fully compatible with any modern turntable.
At the same time vinyl is a specific medium: an analogue sound wave cut mechanically into the record. Because of its physical nature, a complete audio signal cannot be captured without a substantial limit on frequency, amplitude and phase.
free your cartridge® removes most of the limits imposed on the programme while the master is being cut. It also prevents the losses, distortion and noise that inevitably appear when records made by the traditional process are played.
Below is the list of the main problems — limits, distortions, losses and noise — that this invention resolves completely:
- Amplitude limits when cutting the master disc (geometric, kinematic, velocity, electrical and others).Read more
- Use of an elliptical equaliser (EE), aggressive high-pass and low-pass filters, and mid-side processing (M/S) to control — that is, to limit — the low end, the high end and stereo (out-of-phase) information.Read more
- Sibilance. Use of a de-esser and an acceleration limiter to deal with it, and the consequences.Read more
- Vinyl mass noise (on average −40 dB).Read more
- Tracing distortion — the pinch effect, vertical-line distortion and loss of wavelength.Read more
- Spring-back — the lacquer springing back when vertical modulation is cut.
- Distortion of vertical modulation from the mechanical translation itself, caused solely by the slanted planar motion of the cutting-head stylus.
- Problems related to VTA / SRA.
- The speed at which the record turns directly affects quality and is a limiting factor — unlike a 45, a 33⅓ needs tighter limits on the amplitude being cut.
- Diameter loss, or inner-groove distortion. Loss of resolution and performance because the groove radius at the start of the record and at the end differs by almost 2.5 times.
- High-frequency limit — only 8.3 kHz on the first revolution of a standard 33⅓ record, and 3.5 kHz on the inner revolution at the end.
- Eccentricity (vertical, and especially horizontal, the result of a poorly punched centre hole in the stamper from which records are pressed).
- The centre hole (7 mm) has a tolerance of 0.2 mm, which produces 0.1% wow on the outer groove and almost 0.3% on the inner groove.
- Wow and flutter, and the speed instability of the turntable platter.
- Low-frequency parasitic resonance — the cartridge–tonearm resonance.
- High-frequency parasitic resonance — ETM (effective tip mass), the tip-mass resonance.
- Tracking distortion (lateral). The problem of a pivoted tonearm, which produces a time difference between the left and right channels.
- The “energy tsunami”.
- Loss of control over groove depth — the Advanced Ball technique and its consequences.
- Pre-echo, caused by too little space between grooves.
- Burrs (the “lip”) on the groove edges — heating the cutter, and the consequences of removing those burrs at the nickel mother stage.
- Groove deformation under the weight of the stylus. The damage is done on the first play, and there is no way to know how an untouched record would have sounded.